1 Set Of 3 Ton Electric Wire Rope Hoist Sent To UAE

1 Set Of 3 Ton Electric Wire Rope Hoist Sent To UAE

 

Product Name: Electric Wire Rope Hoist Double Speed
 

Lifting weight: 3 ton
 

Lifting height: 12 m

 

The structure and characteristics of the wire rope electric hoist: the machine adopts the design of electromechanical integration, and the wire rope of different specifications can be pressed by changing different molds. It is easy to operate and safe; it is convenient to check, install and maintain the motor. Its main disadvantages are poor heat dissipation conditions of the motor, poor grouping, and complicated power supply devices, manufacturing and assembly.

 

Classification and description of wire rope electric hoist The components of the wire rope electric hoist are: motor, transmission mechanism, reel and sprocket. According to the different positions of the motor and the reel, it can be roughly divided into four types. The pressed steel wire rope has strong pulling force, beautiful appearance and fast speed. It only takes a few minutes to crimp a set of steel wire rope, which greatly reduces labor intensity and improves work efficiency.

 

The electric hoist with the motor installed outside the reel has the advantages of good grouping, high degree of generalization, easy change of lifting height, and convenient installation and inspection.

 

Electric hoists are widely used, but there are few professionals who can correctly operate electric hoists. It is recommended that you learn more about electric hoists, and then make better use of various electric hoists in various fields.

 

 

Safety Precautions
 

1. On the basis of understanding the operating instructions, please also pay attention to the following items:
 

2. Please read the instruction manual and the content on the nameplate before operating.
 

3. Please adjust the upper and lower limit stop blocks before lifting the object.
 

4. Please confirm whether the brake condition is reliable before use.
 

5. If the following abnormal conditions are found on the wire rope before use, never operate it.
 

6. Bending, deformation, corrosion, etc.
 

7. The degree of fracture of the wire rope exceeds the specified requirements, and the amount of wear is large.
 

8. Please use a 500V megohmmeter to check the insulation resistance of the motor and control box before installation and use. The cold resistance at room temperature should be greater than 5MΩ before use.
 

9. Please never lift objects that exceed the rated load. The rated load is marked on the nameplate of the lifting hook.
 

10. It is forbidden to take people on the lifting object, and never use the electric hoist as the lifting mechanism of the elevator to carry people.

 

 

11. No one is under the lifting object.
 

12. Lifting objects and hooks cannot be lifted in a swinging state.
 

13. Please move the gourd to the top of the object before lifting, and do not hang it obliquely.
 

14. The limiter is not allowed to be used repeatedly as a travel switch.
 

15. Objects connected to the ground must not be lifted.
 

16. Please do not perform excessive jogging operations.
 

17. Do not pull other objects in front of the door with the flashlight.
 

18. Be sure to cut off the power before maintenance inspection.
 

19. Maintenance and inspection work must be carried out under no-load conditions.
 

20. Before use, please confirm whether the wedge is installed firmly and reliably.